How to watch Movies and Series for free on the internet

HOW-TO EASILY INSTALL 1CHANNEL, ICEFILMS AND OTHER XBMC ADDONS

Requirements

• Latest Version of XBMC Installed

PART ONE – CONFIGURE FUSION
Step 1: Launch “XBMC” and Navigate to the “File Manager” tab under the “SYSTEM” menu to the far right.

Step 2: Choose the “Add Source” function on the left side of the screen, you might need to double click it if you’re on a computer.

Step 3: Click on the top input box which says “Enter the paths or browse for the media locations” on top of it.

Step 4: Using the on screen keyboard, type in “http://fusion.xbmchub.com” without quotations and then press on the “Done” button to the left of the keyboard.

Step 5: Click on the bottom input box which says “Enter a name for this media Source” on top of it.

Step 6: Using the on screen keyboard, type in “fusion” without quotations and then press on the “Done” button to the left of the keyboard.

Step 7: Verify that everything was typed correctly, then press the “OK” button at the bottom of the window.


PART TWO – INSTALL REPOSITORIES
Step 8: Return to the main menu, and then choose the “Settings” tab under the “SYSTEM” menu.

Step 9: Click on the “Add-ons” link on the left side menu.

Step 10: Press the “OK” button on the “First run help…” popup, if prompted.

Step 11: Choose the “Install from zip file” function from the list.

Step 12: Click on the “fusion” option from the prompt.

Step 13: Choose the “video” folder at the bottom of the list.

Step 14: Select the “repositories” folder listed.

Step 15: Install your desired repository, we’ve listed some of the more popular repositories as follows. We’re going to use “icefilms-repository.googlecode.anarchintosh-projects.1.0.1.zip” for this example.

1channel-repository.bstrdsmkr-0.0.3.zip | 1Channelicefilms-repository.googlecode.anarchintosh-projects.1.0.1.zip | Icefilms
mashup-repository.mash2k3-1.4.zip | Mash Up
projectfreetv-repository.eldorado-1.0.2.zip | Project Free TV & The GiddyUp Network
tubeplus-repository.Jas0npc-1.2.zip | TubePlus, Tv-release & AWEsomeDL
repository.xbmchub-1.0.1.zip | XBMCHUB…Maintenance & Much More

Step 16: Repeat from Step 12 until Step 15 as desired until you’ve installed all the repositories you wish.
PART THREE – ENABLE ADDONS
Step 17: Choose the “Get Add-ons” option from the menu.

Step 18: Select the repository which contains the addon you wish to install. We’ve chosen “anarchintosh addons” for this example.

Step 19: Click on the “Video Add-ons” folder, or whichever appropriate.

Step 20: Select the addon you wish to install, in this case it’s the “Icefilms” addon.

Step 21: Choose the “Install” button from the popup window, then wait about a minute for it to install.

Step 22: Repeat from Step 18 to Step 21 until you’ve installed all the addons you’re looking to use.

Step 23: Return back to the main menu, and Navigate to the “Add-ons” tab under the “VIDEOS” menu heading.

Step 24: Notice the video add-ons you just installed available for your enjoyment.

Step 25: Watch and Enjoy!
Quick Tip: Within the video add-ons menu, navigate to the left of the screen either with your remote, keyboard, or mouse, and change the “View” setting from “List” to “Thumbnail” for a nicer user interface in seconds.

Congratulations! You should now be much more aware as to how to start using XBMC and add add-ons as you wish in the future. We’re doing our best to make things as easy as possible, and also recommend that you check out our XBMC HUB Wizard, which will help you easily configure your XBMC setup in minutes with all the best goodies that XBMC has to offer. You might also want to consider visiting our Forums should you have any questions, or Donate if you’re enjoying this stuff. Continue browsing our site and you’ll be an expert in no time at all.

Wireless Internet Service Provider Setup for Beginners with bonded ADSL

I have notice that there is not much info on the internet about Wireless Internet Service Provider (WISP) setups so I am going to share with you my very own setup that is cheap and effective.

When people talk about wireless internet , they can only talk about how unstable it is. That is because in the past the wireless infrastructure were still in the development stage and did not perform that good and i am glad to say that we are officially in the wireless infrastructure "prime"  . I don't want to go to deep in how and why the wireless is awesome .

Lets get started.

WISP Basic Diagram and Setup

The setup is as Follow

1. 2x ADSL Routers Connect to Mikrotik RB750 (Bonder) WAN1 and WAN2 Port
Wan1 = IP  192.168.1.2 uses 192.168.1.1 ADSL 2 as Gateway
Wan2 = IP  192.168.2.2 uses 192.168.2.1 ADSL 1 as Gateway

2. From MT RB750 LAN Port connects to Mikrotik 2011uas (PPPOE Server)
RB750 LAN = 192.168.0.1 connects to MT 2011 Wan = 192.168.0.4

3. PPPOE server is created on MT 2011 LAN = 172.16.4.1/22

4. From MT pppoe Server it connects to the tower wireless through a Point to Point connection

5. The client CPE Radio connects to the Sectors on the tower and a WAN pppoe client routers connects to the clients CPE inside the house were it connects to our PPPOE Server.


The Hardware i Use:

•  ADSL Routers : I like to use Dlink and Netgear Routers

•  Bonder and PPPOE Server : I find that Mikrotik router options is awesome for this jobs.

• 3. Point to Point connections : ubiquiti Rocket M5 with 30dBi Dishes

•  Point to Multipoint : Ubiquiti Rocket M2 with 16dBi 120degree Sectors

• 5Client CPE: Depending on distance and interference (0km-1.5km Ubiquiti Loco m2) (1.51km-4km Ubiquiti Nanostation M2) i dont setup clients to fat because setup cost to client will be to high .
• PPPOE Client router: TENDA 300M WIRELESS-N ROUTER. It is a cheap and productive router and supply wireless inside the client house as well.

At this stage we have about 30 clients on 2x 10Mbps uncapped unshaped ADSL account.
 you don't need expensive fiber connections to start your WISP business. and you can grow by adding more ADSL connections from remote sites.

WISP Advanced Setup

By adding all your office devices to a switch , you can connect adsl connections from a remote site and distribute it to your clients . this help your network grow and support the user load.

I hope that this was informative for you and ask me any questions in the comment section

Best Regards
Ferdi de Beer
Proinfotech

ADSL bonding with Mikrotik

ADSL bonding with Mikrotik

Here ill show you how to bond 4x ADSL routers through a Mikrotik 750 Routerboard with just a few scripts and configurations

I assume that all my readers know how to setup a basic ADSL router and will only cover the hardware placement and Mikrotik configuration.

Network layout Diagram

A Mikrotik RB750 (MT RB 750) were used in this tut. We use 4 Ports for the 4 ADSL routers to connect to and the 5th port for our LAN .

Mikrotik (MT) Config

We start by giving and IP address to the MT Router ports and renaming the ports that its easier to manage....

/ip address

add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local

add address=192.168.1.2/24 network=192.168.1.0 broadcast=192.168.1.255 interface=WAN1

add address=192.168.2.2/24 network=192.168.2.0 broadcast=192.168.2.255 interface=WAN2

add address=192.168.3.2/24 network=192.168.3.0 broadcast=192.168.3.255 interface=WAN3

add address=192.168.4.2/24 network=192.168.4.0 broadcast=192.168.4.255 interface=WAN4

 

 

Here we will add the firewall Mangle rules

/ip firewall mangle

add chain=input in-interface=WAN1 action=mark-connection new-connection-mark=WAN1_conn

add chain=input in-interface=WAN2 action=mark-connection new-connection-mark=WAN2_conn

add chain=input in-interface=WAN3 action=mark-connection new-connection-mark=WAN3_conn

add chain=input in-interface=WAN4 action=mark-connection new-connection-mark=WAN4_conn

 

add chain=output connection-mark=WAN1_conn action=mark-routing new-routing-mark=to_WAN1

add chain=output connection-mark=WAN2_conn action=mark-routing new-routing-mark=to_WAN2

add chain=output connection-mark=WAN3_conn action=mark-routing new-routing-mark=to_WAN3

add chain=output connection-mark=WAN4_conn action=mark-routing new-routing-mark=to_WAN4

 

add chain=prerouting dst-address=192.168.1.0/24 action=accept in-interface=Local

add chain=prerouting dst-address=192.168.2.0/24 action=accept in-interface=Local

add chain=prerouting dst-address=192.168.3.0/24 action=accept in-interface=Local

add chain=prerouting dst-address=192.168.4.0/24 action=accept in-interface=Local

 

add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:4/0 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes

add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:4/1 action=mark-connection new-connection-mark=WAN2_conn passthrough=yes

add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:4/2 action=mark-connection new-connection-mark=WAN3_conn passthrough=yes

add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:4/3 action=mark-connection new-connection-mark=WAN4_conn passthrough=yes

add chain=prerouting connection-mark=WAN1_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN1

add chain=prerouting connection-mark=WAN2_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN2

add chain=prerouting connection-mark=WAN3_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN3

add chain=prerouting connection-mark=WAN4_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN4

 

Now add the routes so that the MT router know what its gateways are. 

/ip route

add dst-address=0.0.0.0/0 gateway=192.168.1.1 routing-mark=to_WAN1 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.2.1 routing-mark=to_WAN2 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.3.1 routing-mark=to_WAN3 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.4.1 routing-mark=to_WAN4 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.1.1 distance=1 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.2.1 distance=2 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.3.1 distance=3 check-gateway=ping

add dst-address=0.0.0.0/0 gateway=192.168.4.1 distance=4 check-gateway=ping

Next the Firewall Nat Rules

/ip firewall nat

add chain=srcnat out-interface=WAN1 action=masquerade

add chain=srcnat out-interface=WAN2 action=masquerade

add chain=srcnat out-interface=WAN3 action=masquerade

add chain=srcnat out-interface=WAN4 action=masquerade

 

Lastly we need to add the DNS server that we can resolve hostnames

/ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=5000KiB max-udp-packet-size=512 servers= 221.132.112.8,8.8.8.8













Now test the internet from the LAN side . The more load you put on the better the bonding will work. 

Hope that you find this Tutorial help full . Please ask me any question in the comment section :)

 

Best Regards

Ferdi de Beer

Proinfotech